Figure 12. New Patient Screen With Previous Patient - ZOE PPM3 User Manual

Getting Started
Startup – New Patient Screen
The New Patient Screen follows the Startup Screen. If a patient has previously
been admitted, their information will still be shown in the Patient Information
Area as shown below. To continue with this patient, select "No," and the PPM3
will display the Main Screen with the same Patient Information displayed as
before.

Figure 12. New Patient Screen With Previous Patient

Alternatively, if you will be monitoring a different patient as compared to when
the PPM3 was last powered-down, select "Yes" to discharge the old patient from
the PPM3. This will clear the Patient Information Area and bring up the Main
Screen as shown in Figure 12.
–
Note See the Working With Menus chapter for details on how to use the control knob to
select the Yes/No menu items.
Note – If you are using the Nightingale MPC for centralized monitoring, the PPM3 will not
establish a connection until the New Patient question is answered.
2-9
April 2019 N i g h t i n g a l e P P M 3 U s e r ' s G u i d e