ZOE PPM3 User Manual page 152

Managing Alarms
Pressure signal out of range
(low)
No pulse rate due to static
pressure
Unplugged (after start-
up/standby)
Unplugged (after line connected)
Zero required (when transducer
is initially connected)
Zero required and 60 seconds
has expired.
Zero in progress
Zero failed – pulsatile waveform
Zero failed – out of range
Calibration required
Calibration required and 60
seconds has expired.
Calibration in progress
Calibration failed – pulsatile
waveform
Calibration failed – bad cal
resistor
Temperature Conditions:
Condition
TEMP within limits
TEMP < LL
TEMP > UL
Temp > 50 degrees C
TEMP probe disconnected
TEMP bad calibration resistor
12-14
<Number > Medium
--- Low
<Blank> None
<Blank> Low
<Blank> None
--- Low
<Blank> None
N/A Alert
N/A Alert
<Blank> None
--- Low
<Blank> None
N/A Alert
--- Low
Display Alarm
Value Grade
<NUM> None
<NUM> Medium
<NUM> Medium
--- Low
--- Low
--- Low
N i g h t i n g a l e P P M 3 U s e r ' s G u i d e
P1 out of range (low)
HR weak signal
None
P1 unplugged
P1 needs zeroing
P1 needs zeroing
P1 zeroing
P1 unable to zero - unstable
P1 unable to zero - out of
range
P1 needs calibration
P1 needs calibration
P1 calibrating
P1 unable to calibrate -
unstable
P1 problem detected
Message
None
TEMP < LL
TEMP > UL
TEMP out of range
TEMP unplugged
TEMP problem detected
Persistent
Persistent
Persistent
One Time
Persistent
Persistent
Persistent
Alert
Alert
Persistent
Persistent
Persistent
Alert
Persistent
Annunciation
Type
None
Persistent
Persistent
Persistent
One Time
Persistent
April 2019