Ppm3 Monitor Settings - ZOE PPM3 User Manual

19. PPM3 Monitor Settings

The following tables show the factory default settings (Patient Data, Parameter,
Waveform, and Device) for the Nightingale PPM3 monitor. Note the differences
in certain parameter settings for Adult and Pediatric patient types. You may
adjust the parameter and waveform settings for your particular application, and
then save this configuration as a department default for all new patients. These
department default settings can be adjusted as needed for specific patients, as
shown in the Working With Menus chapter. System Settings are specific to a
particular PPM3 device.
Patient Data Settings
Setting name
Patient Last Name
Patient Middle Initial
Patient First Name
Patient ID
Patient Type
Patient Sex
Patient Date Of Birth Year
Patient Date Of Birth Month
Patient Date Of Birth Day
Patient Height
Patient Weight
April 2019
PPM3 Monitor Settings
Default Possible values
value
<BLANK> any text string (39 characters maximum)
<BLANK> any text string (1 characters maximum)
<BLANK> any text string (39 characters maximum)
any text string (39 characters maximum) but
may not include the following characters (since
they are not legal Windows file names, and the
<BLANK>
Patient ID is used to create folder and file
names):
\ / : * ? " < > |
Adult Adult, Pediatric
<BLANK> Unknown (BLANK), Male, Female
(Current Year – 150) up to Current Year
<BLANK>
<BLANK> 1 - 12
1 – maximum number of days in specified
<BLANK>
month and year
0 – 157 inches
<BLANK>
0 – 400 cm
0 – 1100 lbs
<BLANK>
0 – 500 kg
N i g h t i n g a l e P P M 3 U s e r ' s G u i d e
19-1