I Microphone - Icom IC-207H Instruction Manual

I Microphone

(HM-98*)
LOCK CALL
VFO MR
DTMF-S FUNC
AFC AFC-OFF PTT-M
1 2
MONI SCAN PRIO
PGR CSQL DTMF
4 5
HIGH MID LOW
TONE TSQLS TSQL
7 8
DUP DUP+ SIMP
TONE-1 TONE-2 16KEY LOCK
0
VOL VOL SQL
q
UP/DOWN SWITCHES [Y]/[Z]
➥ Push either switch to change the operating frequency,
memory channel, set mode contents, etc. (pgs. 17, 29)
➥ Push and hold either switch to start scanning. (p. 39)
w
PTT SWITCH
➥ Push and hold to transmit; release to receive. (p. 22)
➥ Toggles between transmitting and receiving while the
one-touch PTT function is in use. (p. 23)
SUB
BAND
F-1
F-2
Mic element
MW
3 A
CLR
D-OFF
6 B
SET
T-OFF
9 C
ENT
MUTE
# D
SQL
PANEL DESCRIPTION
e
VFO SWITCH [VFO(LOCK)]
➥ Push to select VFO mode.
➥ Push and hold to toggle the lock function ON and OFF.
r
MEMORY SWITCH [MR(CALL)]
➥ Push to select memory mode. (p. 29)
➥ Push and hold to select the call channel. (p. 34)
t
ACTIVITY INDICATOR
Lights red while a key is pushed; lights green while the
one-touch PTT function is in use.
y
BAND SWITCH
Push to toggle the operating band. (p. 15)
u
FUNCTION SWITCHES [F-1]/[F-2] (p. 61)
Assign your desired key function from the front panel
switches.
• Default settings are [LOW] for [F-1] and [TONE] for [F-2].
i
FUNCTION INDICATOR
➥ Lights orange while [FUNC] is activated—indicates the
secondary function of switches can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad. (p. 48)
o
KEYPAD
Used for controlling the transceiver, transmitting a DTMF
encoder, etc. See the following 2 pages for details.
*Some versions are supplied with the HM-96 instead.
1
6