I Subaudible Tones - Icom IC-207H Instruction Manual

I Subaudible tones

T
9
H I 5
1
Separate setting for each band
➀
Push [BAND] to select the desired band.
➁
Select the mode/channel you wish to set the subaudible
tone frequency to, such as VFO mode or memory/call
channel.
➂
Push [SET] one or more times until "T" and "rT" appears
for repeater use; or until "T SQL" and "CT" appears for tone
squelch or pocket beep use.
• Push [MONI] to reverse the order of selection.
• Cancel the DTMF memory encoder function in advance. (p. 48)
➃
Rotate the tuning dial to select and set the desired fre-
quency.
➄
Push [V/MHz] to exit set mode.
NOTE: The subaudible tone frequency can be set in a
memory channel temporarily. However, the set contents
are cleared once the memory/call mode is selected. To
store the tone frequency permanently, overwrite the chan-
nel information.
SET MODE
USING
The display shows that an
88.5 Hz subaudible tone
frequency is set for re-
peater use.
REPEATER OPERATION
Ä
Push [BAND] to select the desired band, if nec-
SET
essary.
B
Å
Set the mode/channel you wish to set the sub-
audible tone frequency to, such as VFO mode,
memory/call channel or scratch pad memory.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
Ç
Push [FSET] one or more times until "T" and
"rT" appears for repeater use; or until "T SQL"
and "CT" appears for tone squelch or pocket
beep use.
• Pushing [GENT] reverses the order of selection.
• Cancel the DTMF memory encoder function in ad-
vance. (p. 48)
É
Push [Y] or [Z] to select and set the desired
frequency.
• Pushing and holding [Y] or [Z] changes the fre-
quency continuously.
Ñ
Push [ECLR] to exit set mode.
• Subaudible tone frequency list
67.0 79.7 94.8 110.9 131.8 156.7 171.3 186.2
69.3 82.5 97.4 114.8 136.5 159.8 173.8 189.9
71.9 85.4 100.0 118.8 141.3 162.2 177.3 192.8
74.4 88.5 103.5 123.0 146.2 165.5 179.9 196.6
77.0
91.5 107.2 127.3 151.4 167.9 183.5 199.5
5
(unit: Hz)
203.5 229.1
206.5 233.6
210.7 241.8
218.1 250.3
225.7 254.1
26