I Auto Power-Off; I Cooling Fan Setting - Icom IC-207H Instruction Manual

I Auto power-off

The auto power-off function conveniently turns the transceiver
power OFF after a preset time in which no operations are per-
formed. In this way, when you forget to turn the power OFF,
the transceiver automatically turns itself OFF, thereby con-
serving battery power.
The time can be set to 30 min., 1 hr., 2 hrs. or turned OFF.
The selected time is retained even when the transceiver is
turned OFF via the auto power-off function. To cancel the
function, select "oF" in step ➃ below.
➀
Push [PWR] to turn power OFF.
➁
While pushing [SET], turn power ON to enter initial set
mode.
➂
Push [SET] one or more times until "PoF" appears.
• Pushing [MONI] reverses the order of selection.
➃
Rotate the tuning dial to
select the desired auto
power-off time or turn the
timer OFF ("oF").
• "AO" appears when an auto
power-off time is set.
➄
Push [PWR] momentarily to exit initial set mode.
INITIAL SET MODE
USING
AO
The display shows that the
30 min. timer is selected.
OTHER FUNCTIONS
I Cooling fan
setting
The transceiver has a heatsink and cooling fan to radiate
heat. The cooling fan automatically turns ON while transmit-
ting and remains ON for 2 min. after transmitting. The cool-
ing fan can be activated continuously, if desired.
The display shows that the
cooling fan is set for automatic
operation.
➀
Push [PWR] to turn power OFF.
➁
While pushing [SET], turn power ON to enter initial set
mode.
➂
Push [SET] one or more times until "FAn" appears.
• Pushing [MONI] reverses the order of selection.
➃
Rotate the tuning dial to set the cooling fan to automatic
("At") or continuous ("on").
➄
Push [PWR] momentarily to exit initial set mode.
14
INITIAL SET MODE
USING
The display shows that the
cooling fan is set for continuous
operation.
60