I Priority Watch Operation - Icom IC-207H Instruction Manual

10
PRIORITY WATCH

I Priority watch operation

➀
Push [BAND] to select a band, if necessary.
➁
Select VFO mode; then, set an operating frequency.
➂
Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push
memory scan.
For call channel watch:
Select the call channel by pushing [M/CALL] once or twice.
➃
Push for 1 sec. to start the watch.
PRIO
• The transceiver checks the memory or call channel frequency
every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 43)
• While the watch is pausing, pushing the selected band's
[M/CALL] resumes the watch manually.
➄
Push [M/CALL] while the display shows the VFO frequency
to stop the watch.
While pausing on the
memory or call chan-
nel, "PRIO" flashes.
45
for 1 sec. to start
SCAN
9
H I 5
1
PRIO M
Ä
Push [BAND] to select the desired band, if nec-
PRIO essary.
3
Å
Select VFO mode; then, set an operating fre-
quency.
Ç
Set the watching channel(s).
For memory channel watch:
Push [MR] then [Y] or [Z] to select the desired
memory channel.
For memory scan watch:
Push [MR] then [➁SCAN] to start the memory
scan.
For call channel watch:
Push and hold [
channel.
É
Push [➂PRIO] to start the watch.
• The transceiver checks the memory or call channel
frequency every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 43)
• To resume the watch manually while pausing, push
[➂PRIO] or [ECLR].
Ñ
To stop the watch, push [ECLR] once (or twice
while watch pauses).
CALL] to select the call
(MR)