I Location; I Single Body Installation - Icom IC-207H Instruction Manual

I Location

Select a location which can support the weight of the trans-
ceiver and does not interfere with driving in any way. We rec-
ommend the locations shown in the diagram below.
NEVER
place the transceiver or remote controller where
normal operation of the vehicle may be hindered or where
it could cause bodily injury.
NEVER
place the transceiver or remote controller where
air bag deployment may be obstructed.
DO NOT
place the transceiver or remote controller where
hot or cold air blows directly onto it.
AVOID
placing the transceiver or remote controller in di-
rect sunlight.
• EXAMPLE INSTALLATION LOCATIONS

I Single body installation

➀
Drill 4 holes where the mounting bracket is to be installed.
3
• Approx. 5.5–6 mm ( ⁄ in) when using nuts; approx. 2–3 mm (
16
in) when using self-tapping screws.
➁
Insert the supplied screws, nuts and washers through the
mounting bracket and tighten.
➂
Adjust the angle for the clearest view of the function dis-
play.
Nut
Spring washer
Flat washer
When using
self-tapping
screws
Spring
washer
20°
2
INSTALLATION
1
⁄
16
Mounting
bracket
Flange
bolt
10