I Transferring Memory Contents - Icom IC-207H Instruction Manual

I Transferring memory
contents
This function transfers a memory channel's contents into a
VFO (or another memory/call channel). This is useful when
searching for signals around a memory channel frequency
and for recalling the offset frequency, subaudible tone fre-
quency, etc.
Push
DUP T
H I 9
5
1
M
FUNC
➀
Push [BAND] one or more times to select a band.
➁
Select the memory channel to be transferred:
➥ Select memory mode by pushing [M/CALL] once or twice ("!"
appears).
➥ Rotate the tuning dial to select the memory channel.
➂
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
pushing momentarily.
➃
Push and hold [ MW] to transfer when a momentary
(S.MW)
push was used in the previous step.
MW
for 1 sec.
S.MW
DUP T
H I 9
5
1
MW
+
A
CLR
MW] instead of
(S.MW)
MEMORY OPERATION
Ä
Push [BAND] to select the desired band, if nec-
MW
essary.
Å
Select the memory channel to be transferred:
➥ Push [MR] to select memory mode.
➥ Push [Y] or [Z] to select the memory channel; or
push [GENT] then push the desired memory chan-
nel number (2 digits) to select the memory chan-
nel directly.
Ç
Push [FUNC] then [EMW] momentarily, then
push [Y] or [Z] to select another memory
channel to transfer.
• To transfer to the VFO, push [FUNC] then push and
hold [EMW] instead of pushing momentarily.
É
Push [FUNC] then [EMW] for 1 sec. to transfer
when a momentary push was used in the previ-
ous step.
6
32