Priority Watch; I Priority Watch Types - Icom IC-207H Instruction Manual

I Priority watch types

Priority watch checks for signals on a memory or call chan-
nel every 5 sec. while operating on a VFO frequency. The
transceiver has 3 priority watch types to suit your needs. You
can transmit on the VFO frequency while the priority watch
operates.
The watch resumes according to the selected scan resume
condition. See previous page for details.
NOTE:
• Priority watch cannot be started from a scratch pad
memory.
• The DTMF memory encoder is turned OFF when priority
watch starts.
• If the pocket beep function is activated, the transceiver
automatically selects the tone squelch function when pri-
ority watch starts.
• When "SCt-EP" is selected for the scan resume condi-
tion, the priority watch pauses on a no-signal channel.
(p. 43)

PRIORITY WATCH

MEMORY CHANNEL
WATCH
5 sec.
125 msec.
VFO Memory
frequency channel
MEMORY SCAN WATCH
125 msec.
5 sec.
Mch 0
Mch 1
SKIP
VFO
frequency
Mch 2
Mch 150
CALL CHANNEL WATCH
5 sec.
125 msec.
VFO Call
frequency channel
10
While operating on a VFO
frequency, priority watch
checks for a signal on the
selected memory channel
every 5 sec.
• A memory channel with skip
information can be watched.
While operating on a VFO
frequency, priority watch
checks for signals on each
memory channel in se-
quence.
• The memory skip function and
memory area setting are use-
ful to speed up the scan.
While operating on a VFO
frequency, priority watch
checks for a signal on the
call channel every 5 sec.
44