I Optional Mb-58 Installation - Icom IC-207H Instruction Manual

I Optional MB-58 installation

The optional MB-58
REMOTE CONTROLLER BRACKET
able for separate installation.
➀
Drill 2 or 4 holes where the bracket or mounting base is to
be installed, respectively.
1
• Approx. 4 mm ( ⁄ in) when using nuts; approx. 1–2 mm (
8
when using self-tapping screws.
➁
Insert the supplied screws, bolts and washers through the
mounting base and tighten.
➂
Adjust the angle for the clearest view of the function dis-
play and tighten 2 screws when the mounting base is used.
Bracket
When using self-
tapping screws.
Mounting
base
➃
is avail- Attach the supplied Velcro pads (large) to the remote con-
troller and bracket.
➄
Attach the supplied Velcro pad (small) or rubber pad to the
bracket as shown below; then attach the remote controller.
1
⁄ in)
16
MB-58
D When using the MB-65
Mounting
bolt
Adjust the viewing
angle for maximum
visibility of the func-
tion display.
INSTALLATION
IC-207H remote controller
MB-58
MB-65
2
12