Safety; Safety Structure Of The Devices; Emc Requirements - Lauda P 10 Operation Manual

Hide thumbs Also See for P 10:
Table of Contents

Advertisement

1

Safety

1.1

Safety structure of the devices

1.2

EMC requirements

Table 1: Classification in accordance with EMC requirements
Device
Heating thermostat
V6
The devices can only be operated as intended under the conditions
specified in this operating manual. Any other mode of operation is con-
sidered to be an unintended use and could compromise the protection
warranted by the device.
The devices are not designed for use in medical applications in accord-
ance with DIN EN 60601-1 and IEC 601-1!
This operating manual is part of the device. The information in this oper-
ating manual must therefore be kept at hand in the immediate vicinity of
the device. Be sure to carefully store this copy of the operating manual.
If this operating manual is lost, contact LAUDA Service Constant
Temperature Equipment. You will find the contact information here
Ä Chapter 13.4 "Contact LAUDA" on page 141.
When operating the device, there is a risk of injury from high and low
temperatures, fire and the presence of electrical energy. These risks posed
by the device have been mitigated in the design to the extent possible in
keeping with the applicable norms. The remaining risk can be reduced using
one of the following measures:
Safety equipment is available for the device. This equipment is critical
to the safety of the device. Appropriate maintenance activities must be
implemented to ensure the device remains in good working order.
The safety fittings for the device are described in this "Safety" chapter.
Various warning symbols are located on the device. These symbols must
be observed without fail.
The warning symbols on the device are described in this "Safety" chapter.
This operating manual contains safety information. This information
must be followed at all times.
Personnel and the protective equipment worn by personnel are also
subject to specific requirements.
These requirements are described in this "Safety" chapter.
Refer to Ä Chapter 1.19 "Structure of warnings" on page 14 for
more information on the general structure of safety notices.
Immunity requirements
Table 2 (Industrial)
in accordance with
EN 61326-1
PRO bath thermostats and circulation thermostats
Emissions class
Emissions Class B
in accordance with CISPR 11
Customer power supply
Worldwide
No limitation
7 / 156

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents