Disassembling The Cartridge - Husqvarna FE 350 2015 Repair Manual

6
FORK, TRIPLE CLAMP
Disassemblin
Info
The steps are identical for both fork legs.
(
-
Clamp the open end wrench in the vise. Release screw cap
remove it yet.
I
Special socket (T14047)
-
Pull the spring down. Remove the open end wrench.
-
Remove the screw cap.
-
Remove the spring with the preload spacer(s).
201724-11
the cartrid e
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring.
Main work
-
Degrease piston rod
I
Clamping stand (T14049S)
-
Remove adjusting tube
202480-10
-
Remove spring seat
-
Pull the piston rod out of the cartridge.
201726-12
-
Clamp the tube of the cartridge into a vise.
I
Clamping stand (T14049S)
-
Release seal ring retainer
(!ill p. 298)
(!ill p. 17)
(!ill p. 19)
O
and clamp it in the vise.
(!ill p. 299)
@.
Unscrew spring guide
8.
(a p. 299)
0
and remove with the washer.
O
but do not
CD.
20