Table of Contents
Advertisement
Disassemblin g the air cartrid g e
Caution
Danger of accidents
Disassembling pressurized parts can cause injuries.
-
The fork is filled with compressed air. Please follow the description provided.
0�
-
Remove upper slide bearing
Info
Without using a tool, pull the stack slightly apart
by hand.
-
Take off lower slide bearing
-
Take off support ring Ci).
-
Take off seal ring
-
Take off lock ring @.
-
Take off dust boot
-
Unclamp the fork leg.
Preparatory work
-
Disassemble the fork legs.
Main work
-
Remove protection cap
-
Slowly release the pressure from the air cartridge.
•
Info
I
Hold the piston rod in extended position to allow the
air pressure to balance between the positive air cham
ber and the negative air chamber.
-
Remove valve core
-
Clamp the air cartridge.
I
Clamping stand (T14072)
e
-
Remove lock ring
-
/
Remove fluid barrier
-
Heat up thread area of air cartridge
Guideline
1
so
c
(122 °F)
0
-
Loosen seal ring retainer
B03552-10
FORK, TRIPLE CLAMP 6
@).
(D.
G, .
(D.
(a
p. 21)
O.
8.
(a
p. 321)
(D.
C,.
O.
Cs,.
25
Advertisement
Table of Contents
