Removing The Primary Gear; Removing The Timing Chain; Removing The Spacer - Husqvarna FE 350 2014 Repair Manual

ENGINE
18
18.3.25

Removing the primary gear

18.3.26

Removing the timing chain

18.3.27

Removing the spacer

-
Remove pin@).
-
Push oil pump shaft Gi) inward and take it out of the engine from the alternator
side.
4'.
-
Remove force pump
O.
-
Remove nut
• Info
I
Left-handed thread!
-
Take off primary gear(!}.
O.
-
Remove screws
-
Remove the timing chain tensioning rail(!}.
-
Remove the timing chain guide rail 6).
C,.
-
Remove screw
0
Take off balancer shaft
Info
If the timing chain is going to be used again, mark its direction of travel.
O
-
Remove spacer of the crankshaft.
-
Remove screw (!}.
with the timing chain and timing chain securing guide.
139