Checking The Shock Absorber Linkage - Husqvarna FC 450 2014 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.11 Checkin the shock absorber linkage
-
Position the rear frame.
-
Mount and tighten screws
Guideline
Screw, subframe
@)
-
Remove screws on both sides.
-
Mount and tighten screws
Guideline
Screw, subframe
-
Position the manifold.
C,.
-
Attach springs
I
Spring hook (50305017000) ('r p. 220)
-
Mount and tighten screw
Guideline
I
Screw, manifold holder
-
Position the angle lever and linkage lever.
-
Mount and tighten fitting
Guideline
I
Nut, linkage lever to angle lever
-
Mount and tighten screw@.
Guideline
Screw, bottom shock
absorber
Finishing work
-
Install the main silencer.(,... p. 74)
-
Install the right side cover. (,... p. 79)
-
Mount the seat. (,... p. 79)
-
Remove the motorcycle from the lift stand. (,... p. 10)
Preparatory work
-
Raise the motorcycle with a lift stand. (,... p. 10)
Main work
O.
-
Remove screw
-
Remove screw connection
Info
Raise the wheel slightly to make it easier to remove the screws.
@}
on both sides.
M8 30 Nm
(22.1 lbf ft)
@)
on both sides.
M8 30 Nm
(22.1 lbf ft)
0.
Cs}.
I
M14x1.5
M10 60 Nm
(44.3 lbf ft)
@}.
51
Loctite ® 2701 TM
Loctite 2701 TM
®
15 Nm (11.1 lbf ft)
I 80 Nm (59 lbf ft)
Loctite ® 2701 TM