Installing The Water Pump Cover - Husqvarna FC 250 2015 Repair Manual

17 ENGINE
17.5.18

Installing the water pump cover

-
Put on the clutch cover gasket.
• Info
I
Ensure that the dowel pins are seated properly.
-
Position the clutch cover.
• Info
I
Ensure that the sha ft seal rings o f the water pump and the cranksha ft are
not damaged.
O.
-
Remove screw
8
-
Mount screws b ut do not tighten yet.
Guideline
I
Screw, clutch cover
(D
Mount screws b ut do not tighten yet.
Guideline
I
Screw, clutch cover
-
Tighten all screws in a crisscross pattern.
Guideline
I
Screw, clutch cover
-
Mount the two-part water pump impeller
8-
-
Mount and tighten nut
Guideline
Nut, water-pump wheel
-
Mount the water pump cover with the seal ring.
• Info
I
Ensure that the dowel pins are seated properly.
(D
-
Mount screw with the seal ring b ut to not tighten yet.
Guideline
I
Screw, water pump cover
C,
-
Mount screw b ut do not tighten yet.
Guideline
I
Screw, water pump cover
-
Mount and tighten screws@».
Guideline
I
Screw, water pump cover
(D
-
Tighten screws and
Guideline
I
Screw, water pump cover
I
M6x25
I
M6x45
O.
M6 5Nm
(3.7 lbf ft)
I
M6x25
I
M6x25
I
M6x40
C,.
I
M6x25
173
110 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbfft)
Loctite 243
® ™
10 Nm (7.4 lbfft)
I10Nm(7.41bfft)
10 Nm (7.4 lbfft)
10 Nm (7.4 lbf ft)