ENGINE
18
18.4.28
Checking the freewheel
18.4.29
Removing the freewheel
Mount valve keys
Info
•
I
When mounting the valve keys, ensure that they are seated properly; it is
recommended to adhere the valve keys to the valves with a small amount
of grease.
Position cam levers
Mount the cam lever shafts.
Remove screw
Mount and tighten screw plugs (D.
I
Guideline
Screw plug, cam lever axis
Place shims into the valve spring retainers according to the installation position.
308673-10
Insert freewheel gear
wise; do not wedge.
Check the locking action of starter wheel
If the freewheel gear does not turn clockwise or if it does not lock counter
clockwise:
-
Change the free wheel.
302804-10
Remove lock ring
CD.
8
in the positions they had before they were removed.
0.
M 1 0x1
O
into the freewheel hub, turning the freewheel gear clock
O.
O.
157
10 Nm (7.4 lbf ft)