Network Setup; General - Idis DR-8300 Series Operation Manual

Network Setup

Refer to the Menu Use on page 34 for basic
information on using the Setup menus.

General

● Remote Audio Channel: Transmits the selected
channel's audio to the remote program. Select Select
From Client to stream audio of the channel selected
on the remote program.
Audio skipping and sync issues can occur under poor
network conditions.
● Enable SSL for Transferring Data: Applies SSL
(Secure Sockets Layer) protection on remote viewing
and recording data transmissions.
• If using the SSL feature, it will not be possible to
connect to the NVR from a remote program or a
network keyboard that does not support SSL.
• Changing the SSL setting temporarily severs all
remote connections to the NVR in order to apply the
change.
• This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
● Network Bandwidth Limit: Configure the network
bandwidth sent to the remote locale.
– Bitrate: Set the size of the bandwidth.
– Burst: Set the burst-byte or buffer byte size.
– Latency: Set the latency.
– MTU: Set the maximum transmission unit (MTU).
If you configured Network Bandwidth Limit, the
live video may not display smoothly in a remote
program.
Part 2 - Configuration
89