1
Select Scan to commence scanning.
Only cameras that are connected to the NVR via VIDEO
IN ports can be scanned and registered.
2
Select a camera from the scan list and then select
Add Camera. The device login window will appear.
3
Enter a User ID and a Password for the selected
camera.
Set Camera Password
For IDIS protocol cameras that support changing and
finding the camera password, you must set the camera
password at the time of initial camera registration. The
email information is used to change and find the camera
password.
Go To Camera
Moves the focus automatically to the camera using the
MAC address and model of camera in the camera list.
Search Scope
Filters the cameras in the camera list depending on the
search scope such as specified IP address range.
Screen Auto. Assign
Assigns the detected cameras on the video display area.
Part 1 - Getting Started
17