Idis DR-8300 Series Operation Manual page 48

Part 2 - Configuration
Set Camera Password
For IDIS protocol cameras that support changing and
finding the camera password, you must set the camera
password at the time of initial camera registration. The
email information is used to change and find the camera
password.
1
Select the dedeivce from the list and click the Add
Camera button, then Set Password window will
appear.
Only the camera that does not set password of the
camera which supports the password setting function
is displayed.
48
2
Enter the password and e-mail address, and then
select OK.
• If you do not authenticate your email address,
you may not be able to find your password
unless you enter the correct information.
• FEN setup is required for authentication. For
more information on FEN setup refer to FEN on
page 94.
• By selecting Apply to All Devices, you
can apply the same password and e-mail
information to cameras that require password
settings in the scan list.
• When you select multiple network devices
from the list and click the Add camera button,
a window for the network device will appear.
Select Skip to skip the authentication settings
for the current network device and to display
the Authentication window of the next network
device.
3
When the password is set, the login window will
appear.