System Setup; General - Idis DR-8300 Series Operation Manual

Part 2 - Configuration

System Setup

Refer to the Menu Use on page 34 for basic
information on using the Setup menus.

General

This Setup menu contains general system options.
● Site: Used to enter a description about the system's
installation site (no description by default). You can
edit the information using the virtual keyboard.
● System ID: Used to identify the NVR apart from other
NVRs. System ID is also used to control the NVR with
the remote control.
The default System ID is 0 and can be changed to a
value between 0 and 99. The System ID can also be
entered using the virtual keyboard.
● Language: Choose a language.
● Version: Indicates the software version.
● Upgrade: Upgrade the system. If NetFS feature is in
use, click Upgrade. You can select the USB Port or
NetFS. If the NetFS feature is not in use, you can only
select the USB port. Selecting the USB port displays
the USB search window. You will then be able to
select an upgrade package and upgrade the system.
Selecting NetFS displays the list of registered FTP
sites. Once the upgrade is completed, the NVR will
reboot automatically.
36
When using Use 2FA feature, registered mobile device
must be authenticated to upgrade the system. For
more information on 2FA function, refer to Use 2FA on
page 41.
● Setup: Exports current NVR settings or imports
existing settings. If the NetFS feature is in use, you can
export or import NVR settings in the registered FTP
site.
● Import: Decide whether to import network settings
as well. If you do not wish to change the current
network settings, do not select Include Network
Setup.
Selecting Setup Import does not change the settings
below.
• Time-related settings (Date/Time, Time Zone, and
Use Daylight Saving Time)
• Camera-related Advanced Settings settings
• Camera-related Stream settings (Only if the
resolution is different from the camera in exporting)
• Camera-related Audio settings
• Camera-related SD Card settings
If users and groups are deleted, existing user settings
are retained.
● Export: Exports the current system settings to a
storage device connected to the system's USB port or
the registered FTP site in NetFS. You can designate a
File Name for the export file.
For USB flash memory devices, the NVR supports the
FAT32 file format only.
● Show System Log: Displays a searchable list of 5,000
most recent system log entries. For more information
on types of system log entries, refer to the System
Log Types in the installation manual. The
appears next to log entries originating from a remote
source. To export the system log, select the Export
at the bottom of the screen and then designate a file
name.
icon