Pre-Event; Smart Failover - Idis DR-8300 Series Operation Manual

Part 2 - Configuration

Pre-Event

When an event occurs, enabling this option includes
the specified duration prior to the event in the event-
triggered recording.
● No.: Select which cameras to apply Pre-Event to.
● Video Profile: Select a video profile for the recording.
● Dwell: Specify the duration of pre-event recording
data.
• If no event mode schedule exists in the schedule, a
warning message prompting you to add an event
mode schedule will be displayed.
• The warning message will appear even in Time &
Event mode.
62

Smart Failover

When the connection is recovered again, Smart Failover
Service enables the data recorded on SD memory card
to record on NVR.
● Smart Failover: Depending on whether Recording
Failover Service is in use, the screen indicates "Smart
Failover: Use, or Unuse".
● Recorded Data: Indicates the time information of the
recorded data.
● Status: Indicates the current status of the recorded
data.
• This function supports only if selecting the
Recording Failover Serivce.
• This function is only supported for the cameras
supporting Failover recording of SD memory
card.
• If the camera is reconnected during recording,
the video recording will restart from the
beginning.