Alarm Box_Registration; Alarm Box_Upgrade - Idis DR-8300 Series Operation Manual

Part 2 - Configuration

Alarm Box_Registration

You can register the Alarm box on NVR.
● Title: Edit the Alarm Box's name.
● MAC Address: Displays the Alarm Box's MAC address
registered to the NVR.
● Address: Displays the Alarm Box's IP address
registered to the NVR.
● Model: Indicates the Alarm Box's model.
● Scan: Select to scan and register the device
connected to the NVR.
Device Scan
Scan the device under Alarm Box-Registration - Scan.
● No.: Select the the number of the scanned Alarm box
and click the Add Alarm Box button to register the
device.
● MAC Address: Displays the scanned device's MAC
address.
● Address: Displays the scanned device's IP address.
● Model: Indicates the device model.
● Protocol: Displays the scanned device's protocol.
● Name: The "Registered" indicates the VA Box is
registered to the NVR and "Not registered" indicates
88
the VA Box is not registered to the NVR.
● Status: "Registered" indicates the Alarm Box is
registered to the NVR and "Not registered" indicates
the Alarm Box is not registered to the NVR.

Alarm Box_Upgrade

When using NetFS, select Firmware Upgrade. You can
select USB storage or NetFS. If not using NetFS, you can
select USB storage only. Select USB storage to display
USB search window and then select the corresponding
upgrade package from the storage device connected to
the NVR's USB port. After selecting an upgrade package,
select Apply to upgrade the Alarm Box.
• If an upgrade attempt fails, an upgrade failure
message will be displayed. Refer to Error Code
Types in the installation manual for more details.
• The Alarm Box will reboot after the upgrade and
then reconnect automatically.