● Ignoring Interval: The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
motion was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignoring interval setting does not affect the motion
detection recording.
– Use Ignoring Time: Select Time Setup to specify
the PIR detection ignore time. PIR detection will be
disabled during the specified time frame.
Video-Analytics
Event lists that occur through video analysis include
Motion, Tampering, PIR, TripZone and Auto Tracking
events.
Video-Analytics_Motion
● No.: Select which cameras to apply Motion Detection
to.
● Sensitivity: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
● Zone: Define the motion detection block.
Part 2 - Configuration
69