Idis DR-8300 Series Operation Manual page 90

Part 2 - Configuration
● DirectNDC: Use Direct Network Display Control (NDC)
by clicking the Use DirectNDC button to toggle
between On and Off. You will be able to change the
settings if Use DirectNDC is enabled. DirectNDC
service allows you to access the NVR and control it
remotely using a PC or mobile devices via Ethernet.
– Port: Configure the port number of the DirectNDC
server.
– Password: Configure the Password to connect to
the NVR from a remote locale.
Up to three users at a time can access a NVR remotely
via DirectNDC service.
● Network Bandwidth Limit: Configure the bandwidth
limit.
If you configured Network Bandwidth Limit, the live
video may not display smoothly in a remote program.
90
Key
Press the ← to move to the left in the
menu. This is the same as pressing the
←
Left arrow button on the front panel or
the remote control.
Press the → to move to the right in the
menu. This is the same as pressing the
→
Right arrow buttons on the front panel
or the remote control.
Press the ↑ to move up in the menu.
This is the same as pressing the Up
↑
arrow button on the front panel or the
remote control.
Press the ↓ to move down in the menu.
This is the same as pressing the Down
↓
arrow button on the front panel or the
remote control.
Press the Enter or Return key to select
the highlighted item or complete
Enter or
an entry that you have made during
Return
system setup. This is the same as
pressing the Play/Pause button on the
front panel or the remote control.
Character
They play the same role as a keyboard
Input,
input.
Delete,
BackSpace,
Space
Esc
Press the Esc to escape the
Press the F1 key to perform the panic
recording . This is the same as pressing
F1
the PANIC button on the front panel or
the remote control.
Press the F2 key to reset all NVR
outputs while the alarm has been
activated including the built-in buzzer.
F2
This is the same as pressing the
ALARM button on the front panel or
the remote control.
Press the F3 key to initiate PTZ mode.
This is the same as pressing the PTZ
F3
button on the front panel or the
remote control.
Function
sequence.