Idis DR-8300 Series Operation Manual page 100

Part 2 - Configuration
SMTP Setup
Select SMTP Setup at the bottom right corner of the
screen to configure an SMTP server.
1
Select the SMTP server Type.
2
Enter the SMTP Server's IP address or domain name
and then configure the Port and Sender settings.
Default SMTP server port number is 25. Select Test to
send out a test mail using the current settings.
Select SS/TLS or STARTTLS, depending a method of
supporting a secure connection.
• If you have configured the DNS Server setting under
Network - WAN, you can enter the STMP server's
domain name instead of its IP address in the SMTP
Server field.
• Address entered under Sender must be in the
correct email format and include the @ symbol.
If user authentication is required by the SMTP server,
select Use and then enter the User and Password
information.
3
Select OK to apply and exit.
This product contains content developed by OpenSSL
Project for use in Open SSL Toolkit (http://www.
openssl.org/).
100
Attach Type Setup
● Encoding (File name): Set the encoding for the name
of the attached files to BASE64 or PLAIN-TEXT.
● MP4 Clip: When sending an e-mail, event recordings
will be attached and you can set the time to record
MP4 clips.
Event recordings are attached only for the event
that the camera generates.