Http - Idis DR-8300 Series Operation Manual

Part 2 - Configuration
Click the + icon at the bottom of the list to add an FTP
site.
● Site: Displays the list of the registered FTP sites.
Select an FTP site from the list. If the Use settings of
the NetFS site are set to anything other than ALL or
Clip-Copy, you cannot select the FTP site. You can
change the Use settings or register other FTP sites in
the NetFS setup screen in the Network menu.
● Upload File: Select between CBF and MP4. When you
select CBF, the NVR will upload an event detected
video clip to the FTP site. When you select MP4, the
NVR will attach an event-detected video clip to the
FTP site.
● Site Information: Displays information for the FTP
site.
• For the FTP notification to work properly, the related
settings should be configured as follows:
-
Network menu - NetFS tab - Use setting
-
Event menu - Actions - FTP setting
• When you delete an FTP site from the NetFS setup
screen in the Network menu, the FTP site in the
FTP setup screen in the Notification menu will be
deleted, too.
• Be careful when interconnecting with 3rd-party
solutions and systems, since event uploading is a
Best-effort service, not a Guarantee service.
• Event upload does not guarantee real-time due to
the characteristic of the feature.
• If multiple uploads occur in a short period of time,
the images may not be uploaded to the FTP site.
• The FTP notification is not supported for system
events.
• If upload fails several times, the images or video
clips are deleted.
• When the NVR boots, all images and video clips are
deleted even if they were not uploaded yet.
102

HTTP

Notify or forward the events on remote HTTP servers.
The event and NVR information are sent to HTTP servers
in a JSON format.
Click the + icon at the bottom of the list to enter the
HTTP server information.
● Data Format: Set the data format of transmitted
messages.
● Title: Enter the name of the HTTP site.
● Address: Enter the address of HTTP notifications.
● Path: Enter the path of HTTP server address.
● User / Password: Enter the user and password to
access the HTTP site.