Va Box_Exceed The Time Limit - Idis DR-8300 Series Operation Manual

Part 2 - Configuration
– Reference Only: Set the event to be the subject of
a reference.
– Event: Set the reference event.
– Channel: Set the reference channel.
● Actions: Specify which actions to take when an event
occurs.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–Notify: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
• In order to use the Callback feature, the NVR must
be registered on the remote program.
• In order to use the Exceed the People Limit
feature, Queue Managament should be set on
the channel.
80

VA Box_Exceed the Time Limit

This event occurs when people stay in a defined area
longer than the time set.
● Setup: Configure Exceed the Time Limit event.
– Exceed the Time Limit: When people stay in a
defined area longer than the time set, an event
occurs.
● Exceed the Time Limit - Condition: When a
specific event occurs, you can set the condition that
determines whether to operate motion according to
the status of other events.
– Reference Only: Set the event to be the subject of
a reference.
– Event: Set the reference event.
– Channel: Set the reference channel.