Apply/Cancel Buttons; Diagnosis Process - Idis DR-8300 Series Operation Manual

Apply/Cancel Buttons

While in Camera Registration mode, select Apply
to register all changes. When selecting Apply, the
following message will be displayed. You can activate or
deactivate Self-diagnosis.
Select Cancel to exit Camera Registration mode without
applying the changes.
It is not possible to register a camera that has already
been registered to a different NVR.

Diagnosis Process

When the camera is registered to the NVR, Self-
diagnosis runs automatically for the new registered
and changed cameras. If Self-diagnosis is processing,
Diagnosis Processing message will be displayed.
If Self-diagnosis is failed, Diagnosis Requirement
message will be displayed. In this case, you can run Self-
diagnosis manually.
Part 1 - Getting Started
21