Once Run the failover have made to the camera, the
camera will reboot automatically.
Once you have run failover on the camera, the camera
will reboot automatically. By selecting System,
Network, Device Health Status, Storage Status,
Camera Status or VA Box Status, you can see the brief
results of the self-diagnosis for the target device.
The NVR self-diagnostic report can only be viewed in
text form.
This feature is also supported when connected to the
NVR from a remote program.
We recommend clicking the Export button at the
bottom of the list, which allows you to view the reports
on a PC web browser. We also recommend scanning
the self-diagnostic report on a remote program, which
allows you to view the reports in HTML format as shown
below.
Custom Value
● Name: Set the name of system properties to be
included in a JSON file on HTTP notifications.
● Value: Set the value of system properties to be
included in a JSON file on HTTP notifications.
About
● User agreement: User agreement for the use of
the FEN service. If you agree, we collect device
information such as IP address, port and router
information to the FEN server.
Part 2 - Configuration
45