Date/Time - Idis DR-8300 Series Operation Manual

In order to display the system_log.txt file, you must
use the correct character encoding settings and use a
fixed-width font.
● Clear All Data: Erases all recording data. Selecting
Clear All Data displays a confirmation window. Select
Clear to proceed.
• Before you perform Clear All Data, make sure you
are not accidentally deleting important data. Erased
data cannot be recovered.
• Clear All Data does not affect the system log.
Instead, the Clear All Data event will be added to
the log.
● System Shutdown: Shuts down the system. When
prompted, select System Shutdown.
● Troubleshooting Reporting: When there is a
problem with NVR system, generate reports for
troubleshooting.

Date/Time

● Date: Used to change the system's date setting.
● Time: Used to change the system's time setting.
● Date Format/Time Format: Used to change the
system's date and time formats.
● Time Zone: Used to designate the system's time zone.
Refer to the map displayed on the screen and change
the time zone using the mouse or the arrow buttons.
● Use Daylight Saving Time: Enables DST correction.
● Time Sync.: Select a time server for the system to
synchronize with.
1
Select Automatic Sync.
2
Enter the Time Server's IP address or domain name
or select and then choose a server from the list of
registered time servers.
3
Specify the server synchronization Interval.
4
Select OK to apply and exit.
• If you have configured the DNS Server setting under
Network - WAN, you can enter the time server's
domain name instead of its IP address.
Part 2 - Configuration
37