Network Setup; General; Wan - Idis DirectIP DR-1304P Operation Manual

– Notify: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.

Network Setup

Refer to the Menu Use on page 30 for basic
information on using the Setup menus.

General

● Enable SSL for Transferring Data: Applies SSL
(Secure Sockets Layer) protection on remote viewing
and recording data transmissions.
• If using the SSL feature, it will not be possible to
connect to the NVR from a remote program or a
network keyboard that does not support SSL.
• Changing the SSL setting temporarily severs all
remote connections to the NVR in order to apply the
change.
• This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
● Network Bandwidth Limit: Configure the bandwidth
limit.
If you configured Network Bandwidth Limit, the live
video may not display smoothly in a remote program.

WAN

Designate the IP address type as IPv4_Manual, IPv4_
DHCP, IPv6_None or IPv6_Link-local.
IPv4_Manual
● Set Type to Manual.
Manual lets you configure related settings manually.
Configure IP Address, Gateway, and Subnet Mask
settings manually using virtual keyboard's arrow
buttons.
● DNS Server: Enter the DNS server's IP address. The
IP address can also be entered using the virtual
keyboard.
● Remote Port: The port used by the remote program
to connect to the NVR. Choose a value between 1024
and 65535. The port number can also be entered
using the virtual keyboard.
Part 2 - Configuration
63