Text-In Search - Idis DR-8300 Series Operation Manual

Part 3 - Search
● Select First under From and Last under To to search
the recording from start to finish. Alternatively, you
can uncheck the First and Last options and specify
the search time frame manually.
● Type: Motion Search looks for motion in the selected
area by comparing individual frames against their
preceding frames. This means slow and gradual
movements, no matter how long they persist, will not
be recognized. In contrast, Museum Search looks
for changes in the specified area by using the From
frame as a reference. Museum Search, therefore,
recognizes even minute deviations from the original
From frame.
● The Zone setting can be configured in the identical
manner as the Zone setting under System Setup -
Motion Detection. For more information, refer to the
Video-Analytics_Motion on page 69.
Museum Search may not function properly if the
edge of the object is included in the Zone. For more
accurate search results, set the inside of the object's
edge as the detection zone.
● Sensitivity: Set to between 1 (Low) and 5 (High).
● Min. Blocks: The Min. Blocks option is available with
Motion Search only.
Once all the options have been configured, select
Search. Select search results entry to display the video
recording on the left. To play the recording, exit the
setup window by selecting Close.
116

Text-In Search

Select Text-In Search from the Search menu to bring up
the Text-In Search window.
Select a Transaction to display the video recording
that corresponds to the selected time and date (paused
state).
Text-in information is superimposed on the screen at
normal playback speed. The information is not shown
under any other playback speed.
Select Option... to configure Text-In Search options.
● Select First under From and Last under To to search
the recording from start to finish. Alternatively, you
can uncheck the First and Last options and specify
the search time frame manually.
● Channels: Select a channel.
● Select Text-In Device to select a device type.
● + Button: Add a search variable.
● Case Sensitive: Configure case sensitivity.
● Load: Retrieve stored search option settings.
● Save: Save the current search option settings.
Once all the options have been configured, select
Search to begin the search and return to the Text-In
Search setup window.