Additional Event; Additional Event_Alarm-In - Idis DR-8300 Series Operation Manual

Part 2 - Configuration
● Actions: Specify which actions to take when
Tampering is detected.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
– Notify: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
76

Additional Event

A list of events that occur in the camera, system and
other device.

Additional Event_Alarm-In

● No.: Enable / disable alarm-ins.
This option includes both local and network camera
alarm-ins. 1 through 64 are network camera alarm-ins,
whereas 65 through 68 are local alarm-ins.
● Source: Specify the device to use for Alarm-In event.
– Channel: Set the channel of the source you set.
– Sub Channel: Set the sub channel of the source
you set.
● Title: Use the virtual keyboard to enter titles.
● Type: Change the alarm-in type.