Idis DR-8300 Series Operation Manual page 61

Simple Mode Options
● Mode: Select No Record, Time, Event, or Time &
Event.
Unless the Panic Record button is
No
pressed, no recording will take place
Record
during the scheduled time frames on the
scheduled days.
The icon appears on the upper
left corner of the screen. The
Time
appears at scheduled times to indicate
recording is in progress.
The icon appears on the upper
left corner of the screen. The
appears when the specified event occurs
to indicate recording is in progress.
Event
If Pre-Event is enabled, the
not in progress, or the
icons appear when an event occurs
and recording is in progress.
The icon appears on the upper left
corner of the screen and recording
commences as per the video profile
Time &
selected for time under Setup. When
Event
an event occurs, the icon changes into
icon and recording commences as
per the video profile selected for events
under Setup.
● Channel: Select which cameras to apply the schedule
to.
● Settings: Select to configure default recording profile
values for Time Lapse and Event Recording modes.
icon
icon
icons appear when recording is
and
Advanced Mode Options
Select to configure event types and video profiles.
● Type: Event-specific and time recording icons are as
follows:
and
● Video Profile: Configure the profile to use for
recording.
● Dwell: Specify how long to record for after a
corresponding event occurs.
• Upper-tier schedule's settings apply to
unconfigured channels.
• If multiple events take place on a specific channel
and different Video Profile and Dwell Time settings
apply, highest settings apply to all event-linked
recordings.
Time Lapse
(Time)
Alarm-In
Motion
Detection
Video Loss
Recording Fail
Obejct Detection
Exceed the
People Limit
ANPR
PIR
Loitering
Part 2 - Configuration
Audio Detection
Trip Zone
Tampering
Text-In
Fan Error
Exceed the Time
Limit
VA Loss
Alarm Box Loss
Auto Track
Line Crossing
61