Nvr Failover_Setup; Event Monitoring - Idis DR-8300 Series Operation Manual

Part 1 - Getting Started
Device Scan
Scan the device under NVR Failover - Registration -
Scan.

NVR Failover_Setup

This function is supported only with DR-8364F/DR-
8364FD.
● Check Interval: Set the interval to check the status of
the NVR being monitored.
● Setup Backup Interval: Set the interval to backup the
settings of the NVR to alternative NVR.
● Auto Failover Threshold: Set the values for failover
threshold. Threshold is the maximum number of times
that the monitoring result is found to be "Failed".
If this number is exceeded, failover will be applied
automatically.
30

Event Monitoring

When an event occurs, the NVR automatically changes to
the camera screen linking event monitoring and shows
the icon on the system status area on the upper
right portion of the screen. To use the Event Monitoring
feature, navigate to Display Setup > Main Monitor and
enable Event Monitoring. Event Monitoring remains
in effect throughout the entire Linked Time. After that,
the NVR will return to the previous screen if a new event
does not take place. Pressing the Layout or a Camera
button before the end of the Linked Time reverts the
system to Live mode.