Alarm Box; System - Idis DR-8300 Series Operation Manual

Part 2 - Configuration

Alarm Box

This screen displays an overview of Alarm Box events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
Alarm Box Loss
106

System

This screen displays an overview of system events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
● Panic Record: Displays event status based on current
Panic Record status.
● Check Recording: Displays event status based on
System Monitoring settings. For more information,
refer to the Video-Analytics_Motion on page 69.
● Disk Almost Full/Disk Full: If the storage device is
not in Recycle status, event status is displayed when
the amount of disk space specified under System
Monitoring is reached and when the disk becomes
100% full.
● Disk Partially Almost Full/Disk Partially Full: If the
storage device is not in Recycle status, event status is
displayed when the disk of one of two groups reaches
the amount of disk space specified under system
Monitoring and the disk becomes 100% full.
● Disk Config Change: It will be highlighted when
the NVR reboots after the hard disk drive has been
replaced.
● No Storage Found: It will be highlighted when no
recordable storage device has been found.
● eSATA Disconnected: Event status is displayed when
an eSATA device is abruptly disconnected.
● RAID Broken: Event status is displayed when the
RAID configuration is broken.
● Degrade: Event status is displayed when one of the
HDDs composing RAID is in error.
● Fan Error: Event is indicated when the cooling fan
cannot reach a certain RPM or fails for longer than 50
seconds.
● Redundant Power Error: Event status is displayed
when the redundant power is disconnected (This
feature is supported only with DR-8364D/DR-8364FD
model).