Stream I - Idis DR-8300 Series Operation Manual

Part 2 - Configuration
View Options
● Type: Selects the camera view.
● Mode: Selects the screen layout in live mode.
• Dewarping feature is not supported when mode is
set to the original.
• When changing the view mode, the resolution will
be applied automatically.
Miscellaneous
● Image Stabilizer: Activate Image Stabilizer. The
Image Stabilizer reduces blurring caused by camera
shake that results from external conditions such as
the wind.
● Video Out: Select NTSC or PAL as the method of
camera analog video output.
56

Stream I

Configure the camera's live and recording resolution,
codec, picture quality, transfer speed, and ips speed
settings.
● Camera Channels: It's possible to configure a unique
video profile for each camera.
● Bitrate Status: Display the highest value of stream.
Click the Setup button to change the allocation for
each channel.
●
: Apply the video profile settings of the camera
selected under Camera Channel to a different camera.
● Live/Remote Video Profile: Check the current Live
video picture quality and edit remote video profile
settings.
● Record Video Profile: Set up 4 recording quality
profiles.
● Video Profile: Select Stream 1, Stream 2, Stream 3,
or Custom (available from Record Video Profile only).
– Codec: Supports H.264 and H.265.
– Resolution: Select a resolution supported by the
camera. Maximum available resolution is chosen
automatically based on the selected video profile.
– Quality: Select the image quality.
– VBR/CBR: Select CBR or VBR. Transmitted data
size is fixed with CBR but varies depending on the
amount of movements in the images with VBR.
– ips: Select a value between 1 and 30. Maximum ips
is determined automatically based on the selected
video profile.