Network Setup; General - Idis DR-6100P Series Operation Manual

Part 2 - Configuration

Network Setup

Refer to the Menu Use on page 29 for basic
information on using the Setup menus.

General

● Remote Audio Channel: Transmits the selected
channel's audio to the remote program. Select Select
From Client to stream audio of the channel selected
on the remote program.
Audio skipping and sync issues can occur under poor
network conditions.
● Enable SSL for Transferring Data: Applies SSL
(Secure Sockets Layer) protection on remote viewing
and recording data transmissions.
• If using the SSL feature, it will not be possible to
connect to the NVR from a remote program or a
network keyboard that does not support SSL.
• Changing the SSL setting temporarily severs all
remote connections to the NVR in order to apply the
change.
• This product contains content developed by
OpenSSL Project for use in Open SSL Toolkit (http://
www.openssl.org/).
● IDIS Web: If you wish to use IDIS Web, select IDIS Web
- Use IDIS Web Service. Select IDIS Web - IDIS Web
Port and choose a port number between 1024 and
65535. The port number can also be entered using the
virtual keyboard. For more information on IDIS Web,
refer to the Part 4 - IDIS Web on page 89.
66
● DirectNDC: Use Direct Network Display Control
(NDC) by clicking the Use DirectNDC button to
toggle between On and Off. You will be able to
change the settings if Use DirectNDC is enabled.
DirectNDC service allows you to access the NVR and
control it remotely using a PC or mobile devices via
Ethernet.
– Port: Configure the port number of the DirectNDC
server.
– Password: Configure the Password to connect to
the NVR from a remote locale.
Up to three users at a time can access a NVR remotely
via DirectNDC service.
● Network Bandwidth Limit: Configure the bandwidth
limit.
If you configured Network Bandwidth Limit, the live
video may not display smoothly in a remote program.