Storage - Idis DR-8300 Series Operation Manual

Storage

Use this option to configure storage settings.
● Type: Indicates the type of the installed disk.
● Capacity: Indicates the disk's capacity.
● Format: If the disk has been formatted, indicates
either Record or Not Using. If you have connected an
unformatted storage device, the Use As value will be
indicated as Not Formatted.
● Information: Indicates if the disk is being used for
recording purposes. Disks that were used in different
systems will show up as Other. Select Information
to check the saved data's time information or select
Delete to erase the data.
• Select Format to prepare the disk as a storage for
data recording.
• Disks formatted with Use As set to Not Using will
not be used for data recording.
• This NVR supports SATA2 HDDs.
RAID
● Internal HDD: Indicates the disks configuring RAID.
● Setup: Check the RAID setup information and change
it Select RAID level (10,5,1) or Stop and then click OK
to activate the selected RAID setup after the system
has restarted.
If you change the setup related to RAID, you must
reboot the system. All existing data on the disks will
be erased.
● Information: Check the disk information configuring
RAID
HDD Installation Precautions
Depending on the connection port, HDD is divided into
two groups and they record the video input individually
as follows. Refer to HDD Installation Precautions in
the installation manual for more details.
HDD Port
Recording Video In Channel
HDD Port
Recording Video In Channel
RAID Configuration Precautions
Support the four types of RAID configuration as follows.
Refer to RAID Configuration Precautions in the
installation manual for more details.
Configuration 1
HDD connection to Internal SATA Port 1,2,5,6
R1(1,2), R1(3,4), R1(5,6), R1(7,8)
Configuration 2
After setting Configuration 1, add HDD to
Configuration 3
Configuration 4
* R1(1,2) means RAID 1, which is configured as the HDD
connected to the Internal SATA port 1 and 2.
Part 2 - Configuration
Group 1
Internal SATA Port 1, 2, 3, 4
eSATA Port 1, 3
Odd Number
Group 2
Internal SATA Port 5, 6, 7, 8
eSATA Port 2, 4
Even Number
*R1(1,2), R1(5,6)
Internal SATA Port 3,4,7,8
R5(1,2,3,4), R5(5,6,7,8)
R10(1,2,3,4), R10(5,6,7,8)
43