Table of Contents
Advertisement
– Detection Reference Time (sec.) : Set the time to
detect objects in the queue management zone. It
detects when the objects (people) stay longer than
the time frame set in the defined area.
Detection Reference Time (sec.) is only supported
if the Analytic Type is set to Queue Management.
● Reset:
Resets the port or VA Box.
– PoE Reset: Control the PoE Switch's port. This
option is available when connecting to Video In/
PoE port or using a DirectIP PoE Switch (optional).
Select PoE Reset to reboot VA Box.
– Soft Reset:
Reboots VA Box.
Use a client program such as IDIS Center to check
the analysis results.
VA BOX_Schedule
Configure the schedule of the VA Box. Select the
+ button on the bottom left of the screen to add a
schedule. Select Day to specify the Day setting or select
All. Select Scope to specify the time frame.
Deleting the schedules stops the real-time video
analysis.
VA BOX_Upgrade
When using NetFS, select Firmware Upgrade. You can
select USB storage or NetFS. If not using NetFS, you can
select USB storage only. Select USB storage to display
USB search window and then select the corresponding
upgrade package from the storage device connected to
the NVR's USB port. After selecting an upgrade package,
select Apply to upgrade the VA Box.
• If an upgrade attempt fails, an upgrade failure
message will be displayed. Refer to Error Code
Types in the installation manual for more details.
• The VA Box will reboot after the upgrade and then
reconnect automatically.
Alarm Box
It is a device that can be registered in the NVR for the
expansion of the Alarm In / Out device. (IDIS Alarm Box
Model Name: AL-1112)
Part 2 - Configuration
87
Advertisement
Table of Contents
