Idis DR-8300 Series Operation Manual page 125

Used to adjust live video quality.
@
Controls remote alarm out devices. Use the arrow buttons to navigate to the previous/next alarm group.
#
Event status window at the bottom of the screen displays a list of events detected at remote locales.
$
Select a camera from the screen and right-click to bring up the pop-up menu.
● Change Camera Title: Used to change the camera's name.
Renaming the camera in Web Live mode does not affect the camera's name on
the remote system. If no name is entered for the camera, the name used at the
remote locale is shown on the screen.
● Enable Audio: Enables audio transmission with remote locales. Select to display
Enables transmission of audio to the remote locale via microphone.
Enables playback of audio from the remote locale on speakers.
Enables two-way audio communication with the remote locale.
/
Disables audio transmission.
%
If the remote locale connected to supports audio transmission,
screen.
● Aspect Ratio: Changes the aspect ratio of the video displayed on the screen.
– Fit to Screen: Fit the video to the size of the camera screen.
– Fit to Aspect Ratio: Resizes camera screen to original aspect ratio of the video.
– Half Size (x0.5) - 4 Times Bigger (x4): Displays the camera videos in the selected size based on
the original size of the video. For example, original size (x1) displays the video in its original size.
Half size (x0.5) through 4 times larger (x4) options are only available if there is enough space on the
camera screen to accommodate the selected size.
● Anti-Aliasing Screen: Removes stair step effect (blocks) that is caused when zooming a video to
improve overall quality of video output.
Part 4 - IDIS Web
buttons.
icon appears on the corresponding camera
125