Storage - Idis DR-8300 Series Operation Manual

Storage

Indicates each disk's status.
Configure Disk Bad and Disk Temperature settings under
Setup > System > Monitoring.
Not
Formatted
Good
Disk Bad
Error
N/A
Good
Temperature
Bad
N/A
Good
S.M.A.R.T.
Bad
• Check each disk's data storage time information
under Recording Data.
• Clicking the temperature, S.M.A.R.T can check the
each HDD information.
Part 2 - Configuration
A disk that has never
been used before.
● Disk performing
normally.
● If the HDD is partially
damaged, indicates
the bad sector
percentage.
● If the HDD's bad
sector ratio is higher
than as designated
by the user.
● Generates a system
event.
Unable to detect the
disk's temperature.
Operating within
normal temperature
range.
● Disk temperature
higher than as
designated by the
user.
● Generates a system
event.
A disk that does not
support S.M.A.R.T.
A disk with normal
S.M.A.R.T. status.
A disk with abnormal
S.M.A.R.T. status.
Possibility of damage
within 24 hours.
107