Power Connection - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Figure 1-9 Power connection
........................................................................................................................................................................................................................
Route the power cable out of the bay and toward the BDCBB or BDFB, stacking the cable
5
in the bay as shown in
Figure 1-11, "Power cable routing without cable bracket" (p.
Important!
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
CAUTION
Equipment damage
Ensure that the 4 pins inside the connector attached to the power cable are
properly aligned before inserting the connector into the power connector
housing. Failure to do so may result in damage to the connector.
POWER
CABLE
HOUSING MOUNTING
POSITION
Figure 1-10, "Power cable routing with cable bracket" (p. 1-22)
The 1665 DMX High-Capacity shelf is powered by -48 V DC.
Power cable and cable bracket installation
POWER CONNECTOR
HOUSING
1-23).
or
1 - 2 1