Clearing Alarms - Alcatel-Lucent 1665 Installation Manual

Installation tests

Clearing alarms

............................................................................................................................................................................................................................................................
Description
In order to clear standing alarms the 1665 DMX synchronization will be optioned for
"Free Running." The DCC will be disabled in order to prevent DCC alarms from being
generated due to the optical loopback on the main OLIUs.
........................................................................................................................................................................................................................
Select Configuration -> Timing/Sync...
1
Result:
........................................................................................................................................................................................................................
Click
2 OK
........................................................................................................................................................................................................................
Select Configuration -> DCC Terminations...
3
........................................................................................................................................................................................................................
From the Port AID: pull-down, select dcc-m1-1.
4
........................................................................................................................................................................................................................
Next to OSI Over DCC, click disabled.
5
........................................................................................................................................................................................................................
Click Apply.
6
........................................................................................................................................................................................................................
From the Port AID: pull-down, select dcc-m2-1.
7
........................................................................................................................................................................................................................
Next to OSI Over DCC, click disabled.
8
........................................................................................................................................................................................................................
Click Apply.
9
........................................................................................................................................................................................................................
Click Close.
10
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
From the Timing Mode: pull-down, choose Free Running.
.
Clearing alarms
4 - 7