Reset System Date And Time - Alcatel-Lucent 1665 Installation Manual

Software download and circuit pack installation

Reset system date and time

............................................................................................................................................................................................................................................................
Description
The following steps are instructions on how to change the date and time on your shelf if
they have been reset to default values (January 1970).
................................................................................................................................................
Connect the PC and establish a WaveStar
1
................................................................................................................................................
From the System View menu, select Administration -> Set Date and Time to bring up
2
the Set Systems Date and Time screen for 1665 DMX.
................................................................................................................................................
From the Date panel, select the Year and Month from the pull-down menus.
3
Result:
................................................................................................................................................
Click on the Date from the calendar.
4
................................................................................................................................................
From the Time panel, select the Hour, Minute and Second from the pull-down menus
5
(based upon a 12-hour clock).
................................................................................................................................................
Select am or pm.
6
................................................................................................................................................
Click OK.
7
Result:
System View.
................................................................................................................................................
Check off the appropriate box in
8
E O
N D
........................................................................................................................................................
........................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
A calendar is displayed for the month and year selected.
The new date and time appear in the lower right-hand corner of the GUI
S
F T E P S
®
CIT session (graphical).
Appendix E, "Installation
Reset system date and time
checklist".
3 - 1 7