Alcatel-Lucent 1665 Installation Manual page 191

Installation tests
Quantity
2 or 3
2
1
1
2
1
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
Description
15-dB LC-type LBO
(108279480)
20-dB LC-type LBO
(108279530)
Personal Computer (PC)
CIT Interface Cable
LAN 10BaseT Straight-
through Cable CAT 5 or better
LAN 10BaseT Cross-over
Cable CAT 5 or better
Comments
Two 15-dB LBOs are required when optically
1665 DMX
looping the
purposes.In addition, for shelves containing
optical circuit packs in any of the Function Unit
slots, a single 15-dB LBO is required for testing
of the individual ports.
Two 20-dB LBOs are required when optically
1665 DMX
looping the
LNW60.
Required to run the WaveStar
See Chapter 3, "Software download and circuit
pack installation", PC minimum requirements
(p. 3-2).
8-ft. long RJ45 to 9-pin D-sub serial cable
(Comcode 848748869). Required to connect the
PC to the CIT jack on the front of the SYSCTL
circuit pack.
As required to reach from front of 1665 DMX to
the RJ45 patch panel
As required to reach from front of 1665 DMX to
the PC
shelf for test
shelf equipped with
®
CIT software.
4 - 3