Lc-Type Lbo; Lc-Type Lbo Inserted Into Lc-Type Connector Port - Alcatel-Lucent 1665 Installation Manual

Installing fiber connectors and LBOs
ADVANTAGE optical connectivity solution (OCS), the new LC™ optic attenuators are
designed to provide flat spectral loss across the full spectrum, allowing the attenuators to
be used in the 1300-nm, 1400-nm, and 1500-nm bands.
Figure C-2 LC-Type LBO
Assembly of LC-type LBO into LC block
The LC-type LBOs are installed into the LC-type connector by aligning the alignment key
with the slot in the connector port and pushing the LBO into the port until it snaps into
place.
Figure C-3 LC-Type LBO Inserted Into LC-Type Connector Port
Removal of LC-type LBO from LC block
The LC-type LBOs are removed from the LC-type connector port by depressing the tab to
release the LBO and then pulling straight out.
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
SNAP-ACTION TAB
ALIGNMENT KEY
ALIGNMENT
SLOT
15 dB LBO
LBOs
C - 3