Alcatel-Lucent 1665 Installation Manual page 146

Powering and initial circuit pack installation for 1665 Data
Multiplexer (1665 DMX)
........................................................................................................................................................................................................................
Remove the first OC-192 OLIU circuit pack from the packing material.
1
........................................................................................................................................................................................................................
Identify the M1 slot on the 1665 DMX High-Capacity shelf. See
2
High-Capacity shelf" (p.
........................................................................................................................................................................................................................
Place the OC-192 OLIU circuit pack into the M1 slot on the 1665 DMX shelf. Do NOT
3
engage the circuit pack in the backplane connector.
........................................................................................................................................................................................................................
Remove the second OC-192 OLIU from the packing material.
4
........................................................................................................................................................................................................................
Identify the M2 slot on the 1665 DMX High-Capacity shelf. See
5
High-Capacity shelf" (p.
........................................................................................................................................................................................................................
Place the second OLIU circuit pack into the M2 slot on the 1665 DMX High-Capacity
6
shelf. Do NOT engage the circuit pack in the backplane connector.
Important!
to provide proper air flow for cooling. Always use Main-1 (M1) for shelves equipped with
only one main pack.
........................................................................................................................................................................................................................
Check off the appropriate box in
7
E O
N D
........................................................................................................................................................
OC-12 main OLIU installation
Follow this procedure to install the following OC12 OLIU circuit packs in the 1665 DMX
High-Capacity shelf.
LNW48
•
LNW50
•
LNW54
•
........................................................................................................................................................................................................................
Remove the first OC-12 OLIU circuit pack from the packing material.
1
............................................................................................................................................................................................................................................................
2 - 1 6
2-11).
2-11).
If any of the Main slots are to remain unequipped, install a blank circuit pack
S
F T E P S
Appendix E, "Installation
Initial circuit pack installation
Figure 2-2, "1665 DMX
Figure 2-2, "1665 DMX
checklist".
365-372-304R7.1
Issue 1, November 2007